Contact about our Plano roofing

Plano Roofing: Article About Common Problems Found During Roof Inspection

Total Roofing: Honest Roofer in Plano Texas
Total Roofing banner

It is of no doubt that roof defects get worse with time, and not carrying out regular maintenance can create other secondary building concerns. Regular roof inspections by a professional Plano roofing contractor can reveal common problems on the roof. This article explains the most common problems that homeowners can come across during roof inspection.

Homeowners may decide to install a new roofing material on top of an old one. Adaptive reuse of older roofing materials may cause issues with skylights, exhaust vents or problems associated with the mechanical equipment. Depending on the roof's condition and age, homeowners are not only advised to remove old roofing material before installing a new one but also to close up emerging openings on the roof and repair any damaged material.

A loose roofing component is a common problem that homeowners may come across during roof inspections. Loose gutters may lead to rotting behind the trim or fascia. Any other loose component, if not repaired, can make a roof collapse, and such components may also provide habitation for destructive animals such as rodents and birds.

Missing, unsealed or damaged roof flashings are another common problem that may be experienced when unqualified roofing contractors repair or install a roofing system.

Have a question regarding roof inspections or gutters? Please ask a roofer from Total Roofing in Plano Texas today.

More often than not, professional roofing contractors inspecting a roof find missing roof flashing or one with defects.

Problems related to roofing membranes can also be detected during roofing inspections. Roof membranes are special materials laid on the roofing system to prevent rainwater from leaking. Most of these materials are manufactured from modified bitumen materials, thermoplastic material or synthetic rubber. Roofing membranes develop defects or punctures when they're subjected to physical pressure or extreme heat conditions during installation.

The roof underlayment prevents rainwater from leaking into the roof shingle, which in turn damages the roof deck. These materials act as water barriers protecting roofing joints and the roof deck. During the inspection, problems related to the underlayment can be revealed and addressed in time.

Rain gutters should also be checked thoroughly during roof inspection. Usually, gutters are fixed underneath the edge of a roof to help drain melting snow or rainwater from the rooftop and away from the building. Over time, gutters can sag or develop leaks, compromising their intended functions. Gutter problems can be revealed during roof inspection and repaired before they become worse.

Another area that needs to be inspected is the roof rafter. A roof rafter is a type of roofing component designed to support the roof deck. Defects on roofing rafters may lead to collapsing of the roof deck, so it's important to get professional inspectors to check your roof and detect these problems in time.

Contact Total Roofing today

For your free estimate, please call us today at (972) 299-5433 or submit the form below.

Contact GAF Master Elite Roofers: Total Roofing

click to call

click to submit form